How To Change The Ecobee Sensor Battery? (Step By Step Guide)

Sensors are what make thermostats a smart one. What we need to understand is that these thermostats need batteries to operate. The batteries, however, need frequent replacements. If they drain out then your thermostat might not work or might not work properly. Ecobee sensor battery is as much important as Ecobee thermostat battery itself. If you are wondering about the Ecobee battery replacement process then you don’t need to worry as we are here to help.

The Procedure Is Very Easy; Gently Pry Off The Battery Cover, Take Out The Old Battery And Insert A New One With Its Positive Side Facing Up.

Table of Contents

HOW TO CHANGE ECOBEE BATTERY?

Ecobee smart sensor battery needs to be replaced as soon as you feel like it is draining out. The sensors of your thermostat might use a battery cover or a sensor stand. We will guide you through both the processes one by one.

IN CASE OF SENSOR STAND:

If your thermostat’s sensor is using a sensor stand then you need to follow the below mentioned steps.

STEPS TO FOLLOW:

STEP 1 – Locate the narrow part of your sensor stand
STEP 2 – Place your index finger and thumb on that narrow part
STEP 3 – Your other hand must be placed on the front of the sensor
STEP 4 – Now make a gentle pull in the upward direction to release the thermostat’s sensor
STEP 5 – Take a thin tool such as a pen or screwdriver and gently pry out the battery
STEP 6 – Replace the old battery with a new one, make sure the battery has its positive side facing in an upward direction
STEP 7 – Place back the sensor on the sensor stand and you will be good to go!

IN CASE OF BATTERY COVER:

If your thermostat’s sensor is using a battery cover then you need to follow the below mentioned steps.

STEPS TO FOLLOW:

STEP 1 – Locate the recessed corner of your sensor’s battery cover
STEP 2 – Take a thin tool such as a pen or screwdriver and gently remove the battery cover
STEP 3 – By using the same tool, gently pry out the battery
STEP 4 – Replace the old battery with a new one, make sure the battery has its positive side facing in an upward direction
STEP 5 – Place back the battery cover and you will be good to go!

ECOBEE ROOM SENSOR BATTERY – MORE DETAIL:

There are lots of other things that you might want to know about Ecobee sensor batteries. These batteries have a coin-shaped structure. There are two options available for the sensor battery; you can either choose a CR2032 or a CR2477 battery type. However, a better option would be to choose CR2477 as it lasts longer.

Other than this, the maximum life of your sensor battery is about 18-24 months. After completing this time duration, it becomes a compulsion for you to get them replaced as soon as possible. Weak sensor batteries can prevent your thermostat from cooling or they can make you witness a black screen of your thermostat.

CONCLUDING THOUGHTS:

Batteries for Ecobee sensor might need your attention from time to time. It is important to perform the replacement procedure as soon as you feel like the battery is draining. However, the procedure for Ecobee4 thermostat battery replacement is same as other models. You just need to give a thorough read to the above section of this article so you could perform the replacement procedure on your own without taking any additional help.

FAQS:

Q – Why Is My Ecobee Sensor Not Working?
A – Your Ecobee sensor is not working due to the presence of weak batteries. Replace the batteries with new ones and see if the problem still exists or not.

Q – Is There A Battery In The Ecobee Thermostat?
A – Yes, there is a battery in the Ecobee thermostat. These batteries also need a replacement from time to time. If you get these batteries replaced at the right time then you will have your thermostat to work smoothly throughout the year.

Q – How To Change Battery In Ecobee Thermostat?
A – The procedure is very easy; take off the battery cover, remove the old battery and insert a new one with its positive side facing up.