Honeywell Thermostat Recovery Mode (Explained) – 2024

Switching to a smarter tech product means that you will be able to experience more advanced features. What else would a person want if he is getting all the features in a single product? Same is the case with thermostats. There are many categories of thermostats. If you are using an older version of thermostat then you might be missing out on many things. Buying a Honeywell thermostat is all you need if you want to live a peaceful life. The demand of these thermostats is so high that you cannot control from purchasing one.

WHAT DOES RECOVERY MEAN ON HONEYWELL THERMOSTAT?

So one day you decide to fix your thermostat’s cool on issue and along with this you get to experience that the heat on is blinking on your thermostat as well. But these two problems aren’t actually the problems. You need not to worry as we have got these issues covered and they won’t be bothering you that much because they are pretty common. But there might occur a new situation which says that your thermostat is in the recovery mode.

• What is recovery mode?
• How do I exit this mode?
• Is something wrong with my smart thermostat?

All these questions and no answer because this is your first time experiencing this. Well, for your condolences let us tell you that this issue is not really an issue but a feature of thermostat. This might be a new feature but it is useful in most of the cases.

WHAT IS RECOVERY MODE?

If a thermostat is in recovery mode it means that it is finally recovering from being in an energy-saving mode. During this, what thermostat actually does is that it tries to achieve a certain temperature which is warmer or cooler as compared to the outside air. It obviously means that the HVAC system will be turned ON before it has been set to a newer temperature.

HOW TO KNOW THAT THE THERMOSTAT IS IN RECOVERY MODE?

It is important to know when your Honeywell thermostat says recovery. There are various hints to let you figure out that your thermostat is in recovery mode.

• It might show a message saying “Recovery” or “Smart Recovery”
• It might have a small light glowing at the specific part of the display
• It might have a small icon glowing at the specific part of the display

If you come across one of these 3 conditions then conclude it that your Honeywell thermostat in recovery mode is performing a bit different functionality. Now the next section of this article will deal with thermostat in recovery reasons and how we can get rid of it as well.

WHY DOES MY THERMOSTAT GO INTO RECOVERY MODE?

There are any reasons that will clear your query of asking “Why does my thermostat go into recovery mode”. We will be discussing each one of them in great detail.

• MANUALLY PROGRAMMED:

The first and the simplest reason for any thermostat to go into a recovery mode is because it has been programmed in such a way. This setting is meaningful only if you have experienced a beneficial change in the power consumption.

• TEMPERATURE ADJUSTMENT:

Sometimes a thermostat automatically enters the recovery mode to change the already set temperature. This act is totally normal, like you don’t need to worry about this because the smart thermostats and all other smart products are intelligent enough to perform certain tasks on their own.

• ENERGY SAVING:

Honeywell thermostats are smart enough to detect any change. It will observe your usage history and all the related patterns, in order to save energy it will automatically go into recovery mode so less power is consumed.

• FAULTY FIRMWARE:

Where thermostats are smart enough to detect the change, they can also act in the opposite way if one of its major components is not working properly. If your thermostat’s firmware is damaged or faulty then it could read the wrong instructions. It would activate the recovery mode even if it is not required.

• DAMAGED HVAC SYSTEM:

HVAC system holds great importance in thermostats. It is possible that your HVAC system might get faulty and to put less pressure on it, the thermostats automatically enters the recovery mode.

WHAT ARE THE ADVANTAGES OF RECOVERY MODE? – EXPLAINED

After answering what does recovery mean on Honeywell thermostat, now is the time to speak about its advantages. Below we have some advantages mentioned of a thermostat being in recovery mode.

• SAVES ENERGY:

The main reason why a recovery mode is present in your thermostat is to save the energy. When the temperature difference is too high then this mode helps to even it so that the HVAC system doesn’t come under pressure. When the thermostat starts its work to reach the required temperature then it saves a lot of energy in the process.

• PRE-COOLING/PRE-WARMING:

Thermostats provide convenience when in recovery mode. They use the pre-cooling and pre-warming features to adjust the temperature accordingly before the scheduled time. If you decide to start the process just on time then it will consume more energy and will take more time.

• LESS BURDEN ON HVAC SYSTEM:

When your recovery mode is enabled then there is less burden on HVAC system. The pre-mature cooling and heating system doesn’t put much pressure on the HVAC system. If too much pressure is put on the HVAC system then various components might have an early failure.

OVERRIDING RECOVERY MODE ON HONEYWELL THERMOSTAT:

If you want to override the recovery mode on Honeywell thermostat then it is better to follow the below mentioned procedure.

STEPS TO FOLLOW:

STEP 1 – From the display screen, select the “Settings”
STEP 2 – Now select “Preferences”
STEP 3 – Next, look for “Smart Response Technology” and click on it
STEP 4 – Choose “Off” to disable the mode
STEP 5 – Now select “Home” from the previous menu
Now that the process is complete, look if the recovery mode is still on or not.

HOW TO IDENTIFY A FAULTY RECOVERY MODE?

Honeywell following schedule recovery is nothing to worry about. However if the recovery mode has been enabled for a long period of time on your thermostat then you might get it checked. You can also check the temperature difference by observing the room temperature. If these dots don’t connect then chances are that the recovery mode has gone faulty.

WRAP-UP:

Getting to know such features of smart products is really important. You will get to learn many things and it will also save you a lot of trouble because the lack of knowledge might get you into thinking that there is something wrong with your smart product although it is just a feature you don’t know about.

FREQUENTLY ASKED QUESTIONS:

Q – What Is Recovery Mode On Honeywell Thermostat?
A – The recovery mode on Honeywell thermostat means that your thermostat is recovering from an energy-saving mode. This is beneficial as it provides less burden on the HVAC system.

Q – Honeywell Thermostat In Recovery Mode, Is It A Good Thing Or Bad?
A – Not just Honeywell but every other thermostat in recovery mode is more than good enough. Reason being that it puts less burden on the HVAC system which in fact is a very good thing.

Q – How To Know That The Recovery Mode Has Gone Faulty?
A – Your thermostat’s recovery mode has gone faulty if:

• The room temperature is not cool or warm enough as required
• The recovery mode has been enabled for a long period of time
• The recovery mode is ON even after the time limit which you have set