Samsung TV Won’t Turn On? (How To Reset Samsung Tv) 2024

So you decided to buy a brand new TV and suddenly realize that the Samsung TV screen doesn’t turn on. Right after figuring out the placement of power button on Samsung TV you came across this issue. You must feel a wave of frustration and anger but it is what it is. Now you are all like what should I do? Is my TV broken? What about the heavy price which I had paid for my TV? All these questions and only one answer “We are here for you!”

SAMSUNG TV NOT TURNING ON:

There could be many reasons why your Samsung TV is not working. With latest and advanced technology there comes complexities too. So you need to know about each and every reason behind this problem. We will be listing down each and every problem that might be connected with this issue. After that a proper solution will be given against every problem, you can adopt the one which suits you the best.

REASONS FOR WHY WON’T MY SAMSUNG TV TURN ON:

Following are the reasons due to which your Samsung TV won’t turn on.

1. WEAK OR DEAD BATTERIES:

A very common reason due to which your TV won’t turn on is the presence of weak or dead batteries in your remote. Having such batteries can make the connection between the TV and remote weak due to which the commands are not properly given by the remote. Until and unless your smart TV doesn’t get a proper instruction it won’t do anything.

SOLUTION:

The solution for the above problem is to replace the batteries. Buy a new set of batteries and this time of high-quality. Perform the following steps to do the replacement procedure.

STEP 1: Open the back cover of your remote
STEP 2: Remove the old batteries and check for corrosion
STEP 3: If you find any then clean the terminals inside the remote carefully
STEP 4: After the cleaning has been done, take the new batteries and put them in the remote
STEP 5: Your remote should work fine now
Removing corrosion has to be a very important step. Even if you replace the batteries your remote won’t work until and unless the corrosion has been removed properly.

2. PRESENCE OF RESIDUAL POWER IN THE TV:

It might sound weird but sometimes the presence of residual power in the TV causes the issue. But there is nothing to worry about as you can easily drain out this power from your TV.

SOLUTION:

There are a few steps which you can follow in order to get the job done.
STEP 1: Unplug your Samsung smart TV
STEP 2: Remove the cover of remote and take out the batteries
STEP 3: While the TV being unplugged and batteries being removed, hold the power button for 30 seconds
STEP 4: After exactly 30 seconds, release the button and put back the batteries
STEP 5: Plug in the smart TV after 1 minute and start enjoying your favorite shows on it

Performing the above mentioned steps will allow you to smart reset your TV. This solution will definitely work out for you and if not then you can consider the other ones too.

3. LOOSE POWER CORD CONNECTION:

Another reason for why Samsung TV won’t power on is the loose power cord connection. The power cord that has been plugged in into your TV is present at the back. Make sure there are no faulty wires present and the connection is perfect.

SOLUTION:

If your TV is connected to a faulty power cord then obviously you will have to replace it. But if the power cord is working just fine then either its connection is loose or it requires a plug-out/plug-in step. Both of these steps are explained below.

STEP 1: Switch OFF the main power
STEP 2: Try pushing in the power cord with pressure
STEP 3: If it is already tight then remove it and wait for 60 seconds
STEP 4: After 60 seconds, plug in back the power cord
STEP 5: Switch ON the main power and see if your TV has turned ON or not

While going for this solution it is important that at the end you switch ON the smart TV using the power button present on the TV and not on the remote.

4. INCORRECT INPUT SOURCE:

Dealing with technology isn’t easy at all. You must be very careful with all the connections and stuff. If you don’t do it right then there will be inconvenience faced by you. One of the reasons could be selecting incorrect input source. If you do this then your TV might not turn ON.

SOLUTION:

Fortunately, there are 2 ways to get the job done in the right way.

METHOD 1 – INVOLVING THE REMOTE:

If you want to select the input source with the help of a remote then follow the following steps.

STEP 1: Make sure your TV is switched ON
STEP 2: Give a close look at your remote and find the Source button
STEP 3: Press the button and select the input source from the available options

METHOD 2 – WITHOUT REMOTE:

If you don’t have an easy access to your smart TV remote then you can select the input even without it. Here’s what to do!

STEP 1: Switch ON your TV
STEP 2: You will see a menu button on your TV (at the top or maybe at bottom)
STEP 3: Search for the volume button on the TV to navigate through the options
STEP 4: If you came across your desired option then press the Menu button to make the selection

5. BROKEN BACKLIGHT/BURNT MOTHERBOARD:

We have put these 2 reasons under a single heading because they are considered the technical issues. And the solutions of both the problems are same so why not?
If you have a TV with broken backlight, how would you know? It is simple, just follow the below mentioned steps to figure it out.

CHECKING THE BACKLIGHT:

STEP 1: Make sure your TV is switched OFF
STEP 2: Take a flashlight and bring it closer to the TV screen
STEP 3: If you see a clear image in the screen it means the backlight is just fine
STEP 4: If the image is dull or blur then the backlight might be broken

CHECKING THE MOTHERBOARD:

STEP 1: Remove the back casing of your TV
STEP 2: You will find the motherboard on the left side, take it out
STEP 3: Turn ON your TV and get rid of the connections between power board and motherboard
STEP 4: Make sure the power board is still intact within the TV
STEP 5: If you see the TV with a power light then it means you have a faulty motherboard

SOLUTION OF BOTH THE PROBLEMS:

You will need to hire a repair man from any well-known organization who knows what he is into. He will make the necessary replacements and will fix both of your issues using his technical skills.

6. FACTORY MODE REQUIREMENT:

Sometimes you have made such settings which stops your smart TV to work properly. In this case factory mode resetting is the only option left. There are 2 ways if you want to perform this reset; with remote and without remote. Don’t worry as we are going to cover these both.

FACTORY RESET SAMSUNG TV – WITH REMOTE:

You can perform the reset with the help of your smart remote and here is what you have to do.

STEP 1: Make sure your TV is turned ON
STEP 2: Press the “Home” button on your remote
STEP 3: You will see an option of “Settings”, click on it
STEP 4: Head towards the “General” section and there you will find the “Reset” option
STEP 5: Enter the security PIN (which you have set already)
STEP 6: If there is no PIN then try 0000
STEP 7: After a few seconds, your TV will switch ON again displaying the setup screen

FACTORY RESET SAMSUNG TV WITHOUT REMOTE:

Now if you don’t have your smart TV remote, then what will you do? You can perform the reset using the TV only!

STEP 1: Make sure the TV is switched ON
STEP 2: Press the “Menu Button” present on your TV
STEP 3: Then you will have to visit the “Settings” section
STEP 4: Go to the “General” option and then finally “Reset”
STEP 5: Attach an additional keyboard with your TV
STEP 6: The connection must be made between the keyboard and the back of your TV
STEP 7: After doing this, enter the PIN using the keyboard and have a smooth reset

OTHER SOLUTIONS:

If you have tried the above mentioned solutions then it is time to try on some additional ones. You can change the power socket of your smart TV because it might be a possibility that your socket isn’t working. The next thing is to unplug the TV connection from the wall. After doing so, wait for exactly 1 minute and then rebuild the connection. This might do the trick as well! However, don’t always blame your Samsung TV for not turning on because the issue might lie within your faulty Samsung remote too.

WRAP UP:

We have talked about each and every possible solution which might help you to resolve the issue. We are 99.9% sure that you will have your TV working by using one of our mentioned solutions. Dealing with technology is very fragile, one wrong move and you might lose the product itself. So follow each and every step with great caution to avoid future inconvenience. If you are faceing problems like your Samsung Smart TV Won’t Connect to WiFi or many other problems then checkout out our Samsung Tv category. You will find many related problems with their solution.

FREQUENTLY ASKED QUESTIONS:

Q – Why did my Samsung TV stop turning on?    
A – The issue might lie in your remote control. Remove the batteries of your remote and wait for 8-10 seconds. After that put back in the batteries and see the working. If this doesn’t work then try getting a new pair of batteries.

Q – What would cause a TV not to power ON?
A – There are various reasons for this which are as follows:
• Weak or dead batteries
• Presence of residual power in the TV
• Loose power cord connection
• Incorrect input source
• Broken backlight
• Burnt motherboard
• Factory mode requirement

Q – How do you reset an unresponsive Samsung TV?
A – Make sure your TV is turned OFF. Remove the plug from the main outlet and wait for a few seconds. Reconnect the plug after waiting for a few seconds and press the power button on your TV. This will do a soft reset to your TV.