Solving Ring Doorbell Flashing White Light Issue (2024 Updated)

ring doorbell spinning white light

If youโ€™re one of the many people whoโ€™ve joined the smart home trend and installed a Ring Doorbell, youโ€™re probably loving the convenience and security it provides. But, like with any other technology, issues can arise that put a damper on things. One of the most frequent problems with Ring Doorbells is the flashing white light, which can be frustrating to deal with. If youโ€™re wondering whatโ€™s going on and how to fix it, keep reading to get the scoop.

Why Your Ring Doorbell Is Flashing White Light?

The White Light On The Ring Doorbell May Represent A Variety Of Issues Depending On How It Flashes. The Flashing White Light Could Indicate That The Gadget Is In Setup Mode Or That Its Firmware Is Being Updated.ย  If Your Ring Doorbell Is Already Set Up, The Ring Blinking White Should Not Be Happening Incessantly. If It Does, It Might Indicate A Weak/unreliable Wi-fi Connection Or A Low Battery.

The white light on a Ring Doorbell can flash in different patterns, and each pattern indicates something different. Letโ€™s have a look at different ring doorbell white light flashing patterns and what it indicates.

What White Light Flashing Patterns On The Ring Doorbell Indicates?

In a Ring Doorbell, there are five most common white light patterns that you might encounter. Each of these white light patterns indicates a different problem with your doorbell.

Below are these patterns, what they mean, and how to fix them:


This is one of the most common Ring Doorbell issues. The Ring doorbellโ€™s spinning white light indicates that the Wi-Fi settings are wrong causing the ring doorbell to disconnect to wifi. This problem usually occurs when your device does not have the stored Wi-Fi credentials and hence continues to attempt to connect to the Wi-Fi, resulting in a spinning white light.ย 

Solution: This can effortlessly be resolved by resetting the ring doorbell Wi-Fi. If you too are confused about the resetting process, continue reading to frequently asked questions.


A password error is indicated if there is a blinking white light on the top of your ring doorbell.

Solution: If you see this pattern, use the Ring app to change the Wi-Fi password on your doorbell.


When your ring doorbell begins to flash white on the right, it signifies that the device setup has failed due to a network fault. This happens when your Wi-Fi signal is too weak to maintain a consistent connection and your doorbell is not linked to the Wi-Fi.ย 

Solution: Consider relocating your battery-powered Ring Doorbell closer to your Wi-Fi network and resetting it. If it helps, youโ€™ll know you need to strengthen your Wi-Fi signal.


If the white light to the left of your ring doorbell is blinking, the setup has failed and the issue is not with the strength of your Wi-Fi connection. In such cases, the doorbell might keep going offline as well.ย 

Solution: This can be fixed by unplugging your Wi-Fi router for two to five minutes, then plugging it back in. The problem will be fixed when you restart the setup procedure and it connects to the Wi-Fi.


There are no problems if the entire Ring Doorbell circle flashes a white light. This white light pattern generally shows that the Ring Doorbellโ€™s firmware is being updated. Ring regularly releases firmware updates to improve the deviceโ€™s performance and fix bugs. The device automatically downloads and installs update when connected to the internet.

Solution: It will be resolved after the software is updated, and your ring will return to normal in a matter of minutes.

FAQs Related To Ring Doorbell Flashing:

Now it is time to dive into the other frequently asked questions related to the white light flashing on your ring doorbell and its fixes.

How To Reset The Ring Doorbell Wi-Fi?

If youโ€™re having trouble connecting to your Ring Doorbell, rebooting the Wi-Fi connection may be the solution. Trust us when we say, a Wi-Fi setup error is the cause of many Ring Doorbell difficulties. If your ring doorbell isnโ€™t connecting to the internet or doesnโ€™t have any credentials set up, you may usually address the problem by changing the Wi-Fi settings on your ring doorbell.

Reset Ring Doorbell Wi fi

If you have a Ring device and itโ€™s not working properly, the Ring App will show you an error message to let you know itโ€™s offline. You can easily check this by opening the app.

To fix the problem, click on โ€œReconnect This Deviceโ€ in the Ring App network troubleshooter.

Reconnect This Device in the Ring App

There are two common reasons why your device might lose connectivity to your Wi-Fi network.

  • Firstly, your Wi-Fi password may have been changed, so your device can no longer connect to the network. If this is the case, you can follow the prompts in the app to reset your Wi-Fi password. This is a simple fix.
  • Alternatively, the network settings on your doorbell may be causing the problem, even if you havenโ€™t changed anything. In this case, you will need to go through the Ring Doorbellโ€™s network setup procedure again to reconnect it to your Wi-Fi network.

Overall, if your Ring device is showing a Wi-Fi problem, donโ€™t worry. The Ring App can help you troubleshoot the problem and get your device back online in no time. Just follow the prompts in the app and youโ€™ll be back up and running in no time!

How To Restart My Ring Doorbell?

It is possible that your Ring Doorbell is not operating properly at times, and this is not always due to Wi-Fi, network, or battery difficulties. A hard reset can be a solution to the problem, and luckily, Ring Doorbells have this reset option accessible. Nevertheless, the method of resetting the device is dependent on the deviceโ€™s version.

The reset button on the Ring Doorbell and Ring Doorbell 2 is orange and positioned on the back of the device. Hold down the orange button for 20 seconds to restart your doorbell. The flashing light on the front of the gadget indicates that the device has been reset.

Restart My Ring Doorbell by pressing orange button

In the Ring Doorbell Pro hard reset can be done by holding down the setup button for 15 seconds. Just wait 20-30 seconds before attempting to configure the ring doorbell again.

If your device does not enter setup mode, switch it off for a while. After 10-15 minutes, restart the setup procedure. If none of the above methods assist, you must contact Ring Customer Service Centre.

How To Charge My Ring Doorbell Battery?

You can charge a Ring doorbell by following these steps:

  • Remove the faceplate of the Ring doorbell. You can do this by pressing the release button on the bottom of the device and sliding the faceplate upwards.
  • Remove the battery from the Ring doorbell. Depending on the model of your Ring doorbell, the battery may be either removable or built-in. If the battery is removable, you can simply slide it out of the device.
  • Connect the battery to a charging cable. Most Ring doorbells come with a micro-USB charging cable that you can use to charge the battery.
  • Plug the charging cable into a power source. You can charge the Ring doorbell battery by plugging the charging cable into a wall adapter, a USB port on your computer, or a portable power bank.
  • Wait for the battery to charge. The time it takes to charge the battery will depend on the model of your Ring doorbell and the capacity of the battery. Typically, it takes 4-5 hours to fully charge a Ring doorbell battery.
  • Reinsert the battery into the Ring doorbell once the battery is fully charged
  • Reattach the faceplate of the Ring doorbell. Slide the faceplate back down over the device until it clicks into place.

Thatโ€™s it! Your Ring doorbell should now be fully charged and ready to use. Itโ€™s important to keep the battery charged to ensure that your Ring doorbell can provide reliable security coverage.

To Sum Up:

White light patterns are used by Ring doorbells to signal a variety of issues that need to be repaired. If the camera blinks or flashes white, there is an issue with the Wi-Fi connection or the battery, or it may simply need to restart.

There are several options for resolving these problems. Make sure your Wi-Fi is turned on before attempting any other fixes. Second, ensure that the deviceโ€™s battery is fully charged. Finally, to get your gadget back up and running, repeat the reset procedure outlined above.

If your device is still not working, you may contact Ring support, who can assist you and walk you through a short procedure to confirm it is not broken. If the problem is not resolved, Ring will send you a completely new device at no cost.ย 

Related Posts :

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *