It is about time. Last year the overall weather patterns were so much different, and if I talk about the present patterns, then there is a noticeable change to notice. As these patterns changed, so did the settings of my thermostat.
Previously I was using the strategy of a constant temperature schedule. In this method, I had to program the schedule only once, which would go on for an extended period. But now I have to clear the schedule to program a new one.
But the question is, How to clear the schedule on an old Honeywell thermostat? I didnโt know about this, but after visiting various platforms and forums, I got a complete guide on the Honeywell thermostat reset schedule.
HOW TO CLEAR THE SCHEDULE ON HONEYWELL THERMOSTAT?
There Are Three Ways To Clear A Schedule On Your Honeywell thermostat.
- If Your Thermostat Has A Menu Leading You To Clear The Schedule, Use It.
- The Second Way Involves Resetting Your Thermostat.
- Lastly, You Could Remove Your Thermostatโs Batteries And Insert Them Into The Opposite Orientation.
Now we will proceed further to discuss this matter.
HONEYWELL THERMOSTAT SCHEDULE RESET โ REASONS TO DO THIS
You will not just randomly decide to clear the schedule of your thermostat. Of course, there has to be some reason for doing this. However, there isnโt just one reason in this case but more. We will be discussing those reasons in great detail.
SENSORS RECALIBRATION:
One reason for the Honeywell thermostatโs clear schedule is that the sensors need recalibration. This recalibration will be achieved once you reset or clear the schedule.
UNSATISFACTORY PERFORMANCE OF YOUR THERMOSTAT:
Another reason for clearing the schedule on your thermostat is the unsatisfactory performance of your thermostat. If the thermostat is not performing according to the schedule, it is recommended to clear it.
EXCESSIVE ENERGY USAGE:
If you notice that your thermostat is using way too much energy, it could be because your thermostat is not following the schedule. Solve this problem by clearing the schedule or by resetting your thermostat.
WHICH HONEYWELL MODELS ALLOW THE CLEARING OF SCHEDULE?
If you own a programmable Honeywell thermostat, almost all related models will allow you to clear the schedule. However, if your thermostat is non-programmable, you will be restricted to only ON and OFF options for most of the models.
You can clear schedules on all programmable thermostat models, including:
- 2000 model series
- 4000 model series
- 6000 model series
- 7000 model series
- 8000 model series
- 9000 model series
Other than these models, if you own T5, T6 or T6+ model series, you can perform a schedule reset even then. You can do it either through your thermostat or mobile app.
If you need to know which Honeywell thermostat model you own, then you can check the thermostat ID, which comes with your thermostat in a box. If you canโt find the model ID, you can check the model by removing the faceplate of your thermostat.
RESETTING SCHEDULE โ FOR T5, T6 AND T6+ MODEL SERIES
Follow the steps below to reset a schedule on your Honeywell thermostat T5, T6 and T6+ model series.
STEPS TO FOLLOW:
STEP 1 โ Press the โMenuโ icon
STEP 2 โ Scroll through the available options and look for the โResetโ option
STEP 3 โ Select it and then choose the โScheduleโ option
STEP 4 โ Look for the โReset Scheduleโ option, and the process will be done
FOR LYRIC ROUND AND SMART THERMOSTAT MODELS:
There is a catch involved in these thermostat models. You must reset these thermostats on your own by following just two steps.
STEP 1 โ Search for the โCloudโ icon present on your thermostat; keep holding it
STEP 2 โ Now select the โResetโ option
You can now create a new schedule because your previous one has already been removed.
CLEARING SCHEDULES ON DIFFERENT HONEYWELL THERMOSTAT MODELS
In this section of the article, we will discuss clearing schedules on different Honeywell thermostat models.
HONEYWELL 2000 SERIES:
STEPS TO FOLLOW โ FOR MODIFICATION OF THE SCHEDULE
STEP 1 โ Your primary focus should be on the โSetโ button. Press this button three times until you witness the โSet Scheduleโ option.
STEP 2 โ By using the arrow keys, set the time for the first period of the schedule
STEP 3 โ Now again press โSetโ
STEP 4 โ You can move the system switch to either heat mode or cool mode and then adjust it accordingly
STEP 5 โ Temperature adjustment will also be made using the arrow keys
STEP 6 โ Press the โSetโ button again to save the settings
STEP 7 โ Keep repeating the steps for each period of the schedule that you want to change
STEPS TO FOLLOW โ FOR FACTORY RESET
STEP 1 โ Make sure your thermostat is OFF
STEP 2 โ Cut the power supply from the breaker box
STEP 3 โ Take out the batteries from your thermostat by removing the cover
STEP 4 โ Reinsert the batteries, but this time in the reverse position
STEP 5 โ After waiting for 10-15 seconds, place the batteries in their proper position
STEP 6 โ Place the faceplate back
STEP 7 โ Turn ON the power from the main supply
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
As told above, non-programmable thermostats are stuck to basic functionalities only. So if you want to clear a schedule on this model, you wonโt be able to do this. However, you can perform a factory reset on your thermostat, which will clear the set schedules permanently.
HONEYWELL 4000 SERIES:
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
Luckily Honeywell thermostat 4000 series has a menu dedicated to schedule clearing. You can reset and clear the schedule using this menu.
STEP 1 โ Press the โSetโ button thrice
STEP 2 โ You will see the โSet Scheduleโ option; select it
STEP 3 โ 2 modes will be shown to you; Heat and Cool. Choose the mode for which you want to clear the schedule
STEP 4 โ Now keep pressing the โHOLDโ button along with the UP arrow key for almost 4 seconds
STEP 5 โ This will remove the schedule. Now release the buttons
STEPS TO FOLLOW โ FOR FACTORY RESETTING
STEP 1 โ Make sure your thermostat is ON
STEP 2 โ Look for the โProgramโ button present on your thermostat
STEP 3 โ You will see a button inside the hole, press it using a paperclip and keep holding it for like 3 seconds
STEP 4 โ Now let go of the button, and your thermostat will restart with default settings
HONEYWELL 6000 SERIES:
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
STEP 1 โ Choose the โScheduleโ option by pressing the left button
STEP 2 โ Now press the button present on the right side of the thermostat once you come across the โSet Scheduleโ option
STEP 3 โ You will have to press the middle button to clear the schedule for a specific period
STEP 4 โ Keep repeating step 3 to clear the schedule for all periods
STEP 5 โ To save the changes, press the left button
STEPS TO FOLLOW โ FOR FACTORY RESETTING
STEP 1 โ Make sure your thermostat is ON
STEP 2 โ Look for the โFanโ button, press it and keep holding it along with a UP button
STEP 3 โ Now change the numbers on the right and left to 0 and 39, respectively
STEP 4 โ Press the โDoneโ option
HONEYWELL 7000 SERIES:
STEPS TO FOLLOW โ FOR MODIFICATION OF THE SCHEDULE
STEP 1 โ Press the โScheduleโ option
STEP 2 โ Choose โEditโ
STEP 3 โ You will see a list of weekdays
STEP 4 โ Press the option saying โSelect Dayโ
STEP 5 โ Select โNextโ after you have chosen the day for which you want to change the schedule
STEP 6 โ You can select multiple days or even skip some days. The small checkboxes along with each day will indicate their selection.
STEP 7 โ For setting the start period, use the DOWN and UP arrow keys
STEP 8 โ Press the โNextโ option
STEP 9 โ Now edit the cooling and heating temperatures
STEP 10 โ Repeat the above steps for every period
STEP 11 โ Select โDoneโ to save the changes
STEPS TO FOLLOW โ FOR FACTORY RESETTING
STEP 1 โ Make sure the thermostat is OFF
STEP 2 โ Turn OFF the power from the circuit breaker
STEP 3 โ Remove your thermostatโs faceplate
STEP 4 โ Now take out the batteries from the thermostat
STEP 5 โ Insert the batteries again in the reverse position
STEP 6 โ Leave the batteries for 15 โ 20 seconds
STEP 7 โ Now reinsert the batteries in the correct position
STEP 8 โ Place back the face plate and check the working of your thermostat
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
If you want to clear your Honeywell thermostatโs schedule, you will have to factory reset the device. Doing this will clear all the set schedules accordingly.
HONEYWELL 8000 SERIES:
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
STEP 1 โ Make sure the thermostat is in the ON state
STEP 2 โ Press the โScheduleโ button
STEP 3 โ Select the โEditโ option
STEP 4 โ Select the days which you want to edit
STEP 5 โ Now choose the period that you want to clear
STEP 6 โ Repeat the above steps for all the periods
STEP 7 โ Do all the required reprogramming
STEPS TO FOLLOW โ FOR FACTORY RESETTING
STEP 1 โ Keep your thermostat ON
STEP 2 โ Search for the โSystem buttonโ and press it
STEP 3 โ You will find a blank button present in the middle of the screen; keep holding it for at least 5-6 seconds
STEP 4 โ Allow the permissions to start the factory reset
There are significantly fewer chances that you will come across error codes related to your Honeywell, but if you do, remember that they are effortless to solve.
HONEYWELL 9000 SERIES:
STEPS TO FOLLOW โ FOR SCHEDULE CLEARING USE THE MENU
STEP 1 โ Visit the menu section by pressing the โMenuโ button
STEP 2 โ Now go to โPreferencesโ
STEP 3 โ Choose โRestore Default Scheduleโ
STEPS TO FOLLOW โ FOR FACTORY RESETTING
STEP 1 โ Visit the menu section by pressing the โMenuโ button
STEP 2 โ Now go to โPreferencesโ
STEP 3 โ Choose โRestore Default Scheduleโ
CONCLUSION:
Buying a thermostat and maintaining it is easy, but dealing with such issues where you have no idea is very annoying and demanding. For instance, clearing a schedule might seem easy to you (which it is, of course), but people with 0 knowledge in this domain will need clarification. For your ease, we have written this article to get you through all the hurdles and troubles.
FREQUENTLY ASKED QUESTIONS:
Q โ How To Turn Off The Schedule On The Old Honeywell Thermostat?
A โ Follow the below-mentioned steps.
STEP 1 โ Find the โProgramโ or โSetโ button on your thermostat
STEP 2 โ Keep holding this button for a few seconds
STEP 3 โ Visit the option which says โScheduleโ
STEP 4 โ By using the arrow keys, change the mode to โOFFโ
STEP 5 โ Now again press the โSetโ button to confirm the selection
Q โ How To Cancel A Schedule On The Honeywell Thermostat?
A โ Follow the below-mentioned steps.
STEP 1 โ Press the โMenuโ button
STEP 2 โ Visit the โScheduleโ options panel
STEP 3 โ Select the time and day for which you want to cancel the schedule
STEP 4 โ Choose the โSelectโ option
STEP 5 โ With the help of the arrow keys, select โCancelโ
STEP 6 โ Now press โSelectโ
STEP 7 โ Now press the โDoneโ option
Q โ Do I Need To Reprogram The Schedule After Clearing It?
A โ If you have performed a factory reset, you will have to do everything from scratch, but if you have cleared the schedule, you just need to adjust the temperature settings accordingly.
