Out of many problems, you might come across a problem where your dometic thermostat is stuck in Celsius mode. You have no clue what to do. The difference of temperature between Celsius and Fahrenheit is really concerning for some people.
However, if you want to perform dometic thermostat c to f procedure then we are here to help. The process isnβt really demanding so keep your full focus on the steps and you will definitely be able to solve the issue.
HOW TO CHANGE A DOMETIC THERMOSTAT FROM CELSIUS TO FAHRENHEIT?
If you want to carry out dometic thermostat Celsius to Fahrenheit process then it will literally take just 2 minutes. Follow the below mentioned steps and you will be good to go!
STEPS TO FOLLOW:
STEP 1 β Make sure your thermostat is ON
STEP 2 β Check in which mode your thermostat is operating
STEP 3 β You will see an UP arrow button and a DOWN arrow button
STEP 4 β Press both of these arrow buttons at the same time
STEP 5 β If the current mode is Celsius then it will be changed to Fahrenheit and vice versa
WHAT IF I DONβT FIND ARROW KEYS?
Well, in some cases you will find different keys. Instead of UP and DOWN arrow keys you might witness β+β and β-β keys. Press both these keys at the same time just like before. Remember one thing, the keys might be different but the procedure is not at all different.
DOMETIC RV THERMOSTAT CELSIUS TO FAHRENHEIT β FOR OTHER MODELS
The procedure remains different for various models. If your thermostat is of a different model then you will have to adopt another process to get the job done. For this, follow the following steps below.
STEPS TO FOLLOW:
STEP 1 β Find the βSetβ button and keep pressing it for almost 5 seconds
STEP 2 β For scrolling use the βUPβ and βDOWNβ arrow keys
STEP 3 β Select βSystemβ option
STEP 4 β Select βUnitsβ option
STEP 5 β To scroll through the unit options, use UP and DOWN arrow keys
STEP 6 β You will see βFahrenheitβ option, select it
STEP 7 β To save the changes made, select βSetβ option
After doing this, you will have the settings amended in your own way accordingly.
DOMETIC THERMOSTAT RESET TO FAHRENHEIT:
The difference between Celsius and Fahrenheit temperature could cause you to witness errors like your thermostat reading higher than actual temperature or your thermostat settings not matching the homeβs temperature. If you have tried the above steps but still havenβt figured out what went wrong then the easiest solution is to reset your thermostat to Fahrenheit.
STEPS TO FOLLOW:
STEP 1 β Single Zone LCD thermostat should be in OFF position
STEP 2 β Keep pressing the + button and ON/OFF mode button for almost 3 seconds
STEP 3 β Now to turn the system OFF, again press ON/OFF mode button
STEP 4 β Turn the thermostat switch to OFF
STEP 5 β Press MODE and ZONE buttons simultaneously
STEP 6 β Now you should turn the switch to βONβ position
STEP 7 β After that release the buttons and you will have your thermostat reset successfully
ENDING WORDS:
Dometic and other appliance companies make sure that the process which needs to be followed stays simple. If you want to try out any process then it is guaranteed that the process wonβt be demanding at all. Just follow the steps carefully and you will be good to go.
FREQUENTLY ASKED QUESTIONS:
Q β How Do I Reset My Dometic Thermostat?
A β Follow the following steps.
STEPS TO FOLLOW:
STEP 1 β Turn OFF the thermostat
STEP 2 β Keep pressing the MODE and ZONE buttons
STEP 3 β Now make sure the switch is returned to ON position
Q β How Do I Reset My Dometic 5 Button Thermostat?
A β Follow the following steps.
STEPS TO FOLLOW:
STEP 1 β Press and hold the top and bottom buttons
STEP 2 β The bottom ON/OFF switch should be ON
STEP 3 β As soon as FF appears, release the pressed buttons
STEP 4 β In case you witness EE then it means there is a fault in the communication cable
Q β Where Is The Reset Button On A Dometic Air Conditioner?
A β The reset button is present on the control panel. If you see a red button then definitely it is the one.
